Remote control setup codes for various Devices Roku TVs and Cable boxes - How to setup a dish network remote control to use with a Sansui TV

Brands - Roku TVs, Supersonic, Soniq, JVC, Coby, Craig, Duraband, Sylvania, Magnavox, Devant, proscan, Seiki, LG, ILO and Zenon and more

How to set-up dish network remote control to use with Sansui TV (Setup procedure) 
1 Point the dish remote at the tv.
2 Press and hold the tv button at the top till all 4 lights lite up.
3 Press the red power button at the top once.
4 Press the channel up button slowly till the tv turns off.
5 Press the pound button once.
6 Go back to the top and press the big red power button 3 to 5 times.

Supersonic TV Remote Control Codes

0208 0556 0698 0264 0805

ON MOST REMOTE CONTROLS

1  Turn on the Supersonic TV.
2  Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3  With the button lit, point the remote at the TV and enter the TV’s 4 digit code.
4  Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5  Press the TV button to store the 4 digit code.
6  The button will blink twice to confirm the code is stored.

Remote Control Codes For ROKU TVs

Remote Codes for Roku TV Brands Include: Hisense, Insignia, TCL, Haier, LG, and Sharp.

Cable Provider: ATT Uverse
Remote Control Model Number: S10-S1
Remote Control Codes For ROKU TV: 1346, 1097

Cable Provider: Bright House Cable
Remote Control Model Number: URC1056
Remote Control Codes For ROKU TV: 1756, 0818

Cable Provider: Cablevision
Remote Control Model Number: UR2-CBL-CV04
Remote Control Codes For ROKU TV: 031, 081

Cable Provider: Charter
Remote Control Model Number: UR4U–MDVR–CHD2
Remote Control Codes For ROKU TV: 11756, 11602

Cable Provider: Comcast
Remote Control Model Number: OnDemand DVR 3 Device
Remote Control Codes For ROKU TV: 11756, 11602

Cable Provider: Cox Communications
Remote Control Model Number: URC-8820-MOTO
Remote Control Codes For ROKU TV: 1756, 2360

Cable Provider: DirecTV
Remote Control Model Number: RC65
Remote Control Codes For ROKU TV: 11756, 10818

Cable Provider: Dish Network
Remote Control Model Number: 21.1 IR/UHF
Remote Control Codes For ROKU TV: 535, 556

Cable Provider: ONN
Remote Control Model Number: ONA12AV058
Remote Control Codes For ROKU TV: 3851, 3201

Cable Provider: RCA/Voxx
Remote Control Model Number: RCRN03BR
Remote Control Codes For ROKU TV: 11756, 10818

Cable Provider: Time Warner
Remote Control Model Number: UR5U-8780L
Remote Control Codes For ROKU TV: 387, 251

Cable Provider: TIVO
Remote Control Codes For ROKU TV: 0091, 0366, 0999

Cable Provider: Verizon FIOS
Remote Control Model Number: VZ P265v3 RC
Remote Control Codes For ROKU TV: 180, 342

Cable Provider: XFINITY
Remote Control Model Number: XR2, XR5, Voice Remote XR11
Remote Control Codes For ROKU TV: 11756, 11602

How to use a Logitech HARMONY remote with ROKU

Power on your TV, automatically set the correct inputs, and begin navigating your Roku all with a single Harmony remote. You can also create unique Activities that launch directly into Netflix, Amazon, Pandora or VUDU.

If you have a Harmony hub‑based product then you can easily enter text or use voice search from the Harmony mobile app to make password entry or movie searches a lot quicker. You can also see your favorite Roku channels and launch them with one tap on your touchscreen remote or when using the Harmony mobile app.

And if you have a Harmony hub‑based product, then you can create a Good Morning Activity that automatically turns on a Roku News station each morning at 7AM, or even when there's motion in your kitchen.

Soniq TV 4 Digit Remote Codes

1473 0178 0180 0003 0092 0045 0019 0030
0056 0032 0047 0054 0060 0039

ON MOST REMOTES:
1  Turn on the TV.
2  Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3  With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4  Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5  Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

 SONIQ TV can be controlled with a universal remote and work with Comcast, Dish Network, Direct TV, RCA, etc

JVC TV codes

JVC 3 Digit HDTV Remote Codes

065 067 089 013 054 055 060

JVC 4 Digit HDTV Remote Codes

1227 1130 1131

JVC 4 Digit TV Remote Codes

1080 1092 1117 1131 1235 1288 1299 1011

1012 1026 1049 1052 1054 1055

JVC 4 Digit DVD Remote Codes

2097 2115 2166 2204 2206 2017 2028

2047 2090 2096 2217

JVC 4 Digit VCR Remote Codes

3060 3067 3118 3121 3122 3123

3005 3006 3007 3014 3055

Durabrand TV Remote Codes

4 Digit Remote Codes For DURABRAND TVs:
0178 0180 0003 0171 0463 1034 0003 0154 0236
0623 0493 1038 1046 1047 1109

COBY TV Remote Control Codes

5 digit remote codes for COBY TV = 11538, 12017, 11531, 12003, 11314, 11265, 01376, 10178
4 digit remote codes for COBY TV = 1538, 2017

ON MOST REMOTES
1  Turn on the TV.
2  Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3  With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4  Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5  Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

COBY TV can be controlled with a universal remote and work with Comcast, Dish Network, Direct TV, RCA, etc.

Cosmo TV Remote Codes

10000 11360 10878 11599 10889

Mitsubishi TV Remote Codes

0150 0019 0093 0178

Sylvania TV Remote Codes

0054 0030 0020 0096

Goldstar TV Remote Codes

0003 0004 0043 0080 0153 0172 0252 0269 0270 0280 0299 0333 0393 0395 0399

0400 0476 0477 0481 0482 0486 0498 0501 0513 0518 0528 0544 0579 0581 0590

0592 0599 0600 0624 0641 0663 0673 0677 0678 0694 0697 0752 0794 0409 0410 0414

Devant TV remote codes 

Listed in order of most likely to work

023 024

Craig TV remote codes

Craig TV remote codes

Listed in order of most likely to work…

10180 11822 6222 0073 06222 00073 16222 10073

The codes for a universal remote to work with a Sansui television

834 0310 0394 20695

These codes are compatible with Universal remotes and Sansui televisions that have a functioning infrared device.

Magnavox TV Remote Control Codes

1053  056 1057 1059 1060 1061 1083 1004 1007 1018 1047

Magnavox Sound Bar

32459

Magnavox DVD Remote Codes

2245 2293 2318 2320 2321 2327 2002 2018 2089 2237 2241

Magnavox HDTV Remote Codes

1372 1414 1329 1358

Magnavox VCR Remote Codes

3153 3183 3190 3206 3211 3016 3036 3051 3061 3128 3152

ON MOST REMOTES
1  Turn on the TV.
2  Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3  With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4  Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5  Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Proscan HDTV Codes = 1000

Proscan TV Codes = 1000, 1008, 1068, 1094, 1108

Proscan DVD Codes = 2118, 2144, 2205, 2319

Proscan VCR Codes = 3000

ON MOST REMOTES
1  Turn on the TV.
2  Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3  With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4  Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5  Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Your ProscanTV can be controlled with a universal remote and work with Comcast, Dish Network, Direct TV, RCA, etc

Seiki remote control codes

DIRECTV = 10178 11687, 10178, 10835, 10056, 10150, 10463, 10156, 11498, 11401, 0178,
Comcast = 11864, 10178, 0060
Cox Communications = 0178
Atlas DVR Device URC = 0178
Time Warner Cable = 0178
Philips = 0002
Bell Remotes & Dish Network = 505, 506, 516, 523, 526, 566, 573, 612, 627, 647
ATT U-verse = 1004
Hitachi = 0002
URC = 2964, 0145
Cablevision customer (optimum) = 004

LG remote control codes

DirecTV (directv – direct tv) Remote Codes For LG TV:
LG 5 Digit TV codes: 11423, 10178, 11178.
PRESS IN THIS ORDER
“Menu” > “Settings” > “Remote” > “Program Remote” > “TV”
Slide mode switch at top to “TV” > enter LG – press and hold “select” & “mute” buttons
Wait for light to blink 4 times
Enter 10178.
Follow instructions.
If volume does not work then repeat and enter code 11178.

RCA universal remote codes for LG TV
LG TV codes: 1002, 1004, 1005, 1014, 1025, 1078, 1081, 1095, 1096, 1097,
1098, 1099, 1100, 1101, 1111, 1128, 1130, 1132, 1134, 1144, 1149, 1171, 1205

One-For-All Universal Remote for LG TV
LG TV codes: 0030, 0056, 0178

GE Universal Remote Codes for LG TV
LG 4 Digit TV codes: 0004, 0050, 0009, 0005, 0227, 0338, 0012, 0057, 0080, 0156

Universal Remote = One For All OARC04G 4 Device Universal Remote for Element TV

Newer codes 5 digit

11886 10178 11687 12183

Older codes 3 digit

046 005 028 043 048 076 096 155 004 051 127 151

153 154 231 236 238 247 252 168 121

ON MOST REMOTES

1  Turn on the TV.

2  Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.

3  With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.

4  Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.

5  Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

ILO TV Remote Codes
0171 0179 0180 0463 1000 1004 1030 1035 1054 1090 1133 1168

ON MOST REMOTES
1  Turn on the TV.
2  Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3  With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4  Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5  Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

XENON TV universal remote codes
039 036 0381 0389 00183 00264

ON MOST REMOTES
1  Turn on the TV.
2  Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3  With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4  Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5  Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

XENON TV can be controlled with a universal remote and work with Comcast, Dish Network, Direct TV, RCA, etc

5 digit codes will work with Westinghouse TV
10178 10463 10885 10060 10889 11712 11661 10463 11928*
10890 11282 11577 11100 10080 10000 10111 11548 10623 10000*

Codes listed with an asterisk (*) are possible alternate codes for your TV. These alternate codes should operate the primary functions of your device in most cases (Power, Volume Up and Down, Mute).

Directions to get remote codes to work on Westinghouse TVs
1  TV
2  Press and hold MUTE & SELECT for two blinks
3  Enter 9 9 1, wait two blinks
4  Enter 1
5  Press and release VOL UP
6  Point the remote at the TV and keep pressing and releasing the CH UP key, if and when the volume changes
7  Press select to lock in code.

Some remotes may require you to first switch to TV mode by first pressing the TV key to switch modes. You can then use the POWER or VOLUME keys to see if the television already works with the remote.

Many remote controls will search sequentially for a compatible set of commands. This is the simplest way to program a remote to operate with Westinghouse models. See the particular device instructions for an appropriate sequence of keystrokes.

Learning remote controls are able to capture commands from Westinghouse remote controls. Some are limited to a single command and others can group commands together.

3 Digit Universal Remote Control Codes For Aiwa TVs

Aiwa TV 3 digit remote codes

109 192 402 185 037 064 039

TO USE THE AIWA CODES WITH YOUR REMOTE – FOLLOW 

1 Press and hold the clear TV button at the top until all 4 lights illuminate.

2 Select the code.

3 Press the pound button 1 time.

4 Go to the top and press the red power button until the TV turns off.

How to set-up hua yu Universal remote control - Set up procedure with different type devices

hua yu commonly used universal TV remote control set-up method

Method one: applicable models: RM - 36 e +, HR - N98, HR - I908, HR - E85

Input code set method

1, Turn on the TV power supply, will be the normal play of the TV set, find out from the code table to the corresponding code by the remote control of TV brand.

2, Hold the "set" button on the remote control is not put to press the "power" button, about 3 seconds indicator, let go of the button.

3, Find a set of three digits code. Light is put out.

4, Check the validity of other buttons, the effective set, invalid, repeat steps 1-3.

Search code sets method

1, Let the normal play of the TV set, will be on the TV remote control.

2, Hold the "set" button on the remote control is not put to press the "power" button, about 3 seconds indicator, let go of the button.

3, Press the "volume +" key.

4, When the volume symbol appear on the TV, press the "set" button, the light is put out.

5, Check the other remote control button is valid. If the button is valid, set up successfully, if invalid need to repeat step 2-4, until find the code that suits your TV set.

Method 2: applicable models: HR - 159 - f, HR - N99, HR - E877, HR - 1092 - e

Input code set method

1, Turn on the TV power supply, will be the normal play of the TV set, find out from the code table to the corresponding code by the remote control of TV brand.

2, Hold the "set" button on the remote control, until the work light is lit up, let go of "set" key.

3, Find a set of three digits code. Light is put out.

4, Check the validity of other buttons, the effective set, invalid, repeat steps 1-3.

Search code sets method

1, Let the normal play of the TV set, will be on the TV remote control.

2, Hold the "set" button on the remote control, until after the work light is lit up.

3, of the press "volume +" key.

4, When the volume of symbol to appear on the TV, press the "set" button, the light is put out.

5, Check the other remote control button is valid. If the button is valid, set up successfully, if invalid need to repeat step 2-4, until find the code that suits your TV set.

hua yu universal air conditioning remote control methods

Method one: applicable models: Q - 1000 - e, K - 1036 - e + L, K - 1089 - e + L, K - 1038 - e + L

Human input code

1, Manually open the air conditioner power supply, from the "code table" find out what you want to remote control models of the air conditioner, and find out the first code.

2, Press and hold the "set" key not to put (about 3 seconds), to type the code in a window blink when loosening, according to the temperature "+" or "temperature -" button, until the required code displayed on the window and flashing, such as code is normal, can open air conditioning.

3, Press "done", model code stop shuo.

4, Test the remote control button is valid, effective and set up, is invalid, repeat steps 2 to 3.

Artificial search code

1, Manually open the air conditioner power supply, will the remote control on the air conditioner according to close the window.

2, Press and hold the "set" key not to put (about 3 seconds), to type the code in a window blink when loosening, the temperature "+" button, until the air conditioner automatically open.

3, Press the "complete" button, set up.

hua yu intelligent learning remote control method

A learning remote control are usually have more than one page design, when setting a certain page, all buttons on the remote control buttons with functions of learning.

Learning steps

1. Press the remote control panel on a page set key about 3 seconds, lit up the page, enter the remote learning state.

2. The direction of study will be the launch of the remote control level on your remote control signal window. Then press by learning a function key on the remote control, sending the page lights, said the hair of the function key code instructions which have been identified.

3. Press the hua yu you learning one of the keys on the remote control panel, page lights flashing once out, learning at this time the function keys are you learning remote control remote control study on the key, finished learning.

If working lamp lights up again, the operation of the right now you need to repeat step 2 until the work light is put out.

4. When using your hoau learning remote control, should press the corresponding page you are trying to remote control of home appliance equipment set key, can remote control your home appliances.

  Setting method above apply to most hua yu brand remote control products, such as your remote control model is not in the above model in the list, or set the method above can't normal set your remote control, please enter the hua yu products, product page, open your remote control to find you the setting method of the remote control. Or download your remote control specifications of the products.

Huayu Smart Socket WIFI Problems and Solutions

A, mobile phone or computer cannot be added to the wifi network solution

why

Some wireless devices of the wireless channel RF parameters are not accurate.

The solution

Suggest user to change the wireless router's channel.

Why wifi signal easily dropped?

Wifi drops may be near wi-fi hotspots and other Wifi hotspot channel, so prone to interference, recommend that users replace Wifi hotspot.

Unable to access to the configuration page?

A. Ensure whether the mobile phone or computer access to the IP to the device

B. Use http://huayu.cfg to log in

C. If http://huayu.cfg unable to login, clear the browser cache record run, close the firewall, reoccupy IP configuration into the interface, such as 192.168.253.254.

Sharp LC32GD7E How to enter service mode – adjustments – inverter circuit diagram- LCD COLOUR TELEVISION (Display)

Service mode, Back-light inverter circuit diagram, Lamp error detection, service adjustments - Flicker adjustment – Sharp LC32GD7E – LCD TV

Enter service mode
Pre-setup position: set is in TV mode
1. Press MENU button on top of the TV set to enter menu “direct control on TV set”
2. Press button “P ^” until “service” is shown in menu.
3. When service appears press the MENU button on the remote control within 1 sec.  Service menu appears.
4. Step with cursor buttons on remote control through the service menu to change settings.
5. Each modification of any value has to be memorized with the “OK” button on remote control.

ADJUSTMENT PROCEDURE

The adjustment values are set to the optimum conditions at the factory before shipping. If a value should become improper or an adjustment is required due to part replacement, make an adjustment according to the following procedure.

Enter the display process mode and then adjust COM BIAS. [Caution: Use due care in handling the information described here lest your users should know how to enter the adjustment process mode. If the settings are tampered in this mode, unrecoverable system damage may result.]

COM BIAS adjustment [Flicker]

Shift to the [COM BIAS] item with the cursor UP/DOWN key and select a numeric value with the cursor RIGHT/LEFT key.
Changing the numeric value with the cursor UP/DOWN key will make appear the test pattern. Make an adjustment so that the flicker near the center of the screen is minimized.

Back-light inverter schematic [Circuit diagram]

Inverter-1 schematic and pwb

Back-light inverter-2and PWB

Inverter Ground schematic

Lamp error detection

This liquid-crystal color TV incorporates a lamp error detection feature (lamp error detection) that automatically turns OFF the power for safety under abnormal lamp or lamp circuit conditions.
If anything is wrong with the lamp or lamp circuit or when the lamp error detection feature is activated for some reason, the following will result.
1 The power of TV main body is turned OFF about six seconds after it is turned ON. (The power LED on the front of the TV turns red from green and keeps blinking in red (ON for 250ms and OFF for 1sec)).
2 If occurs five times consecutively, it becomes impossible to turn ON the power. (The power LED keeps blinking in red (ON for 250ms and OFF for 1sec)).

Measures
1) Checking with lamp error detection OFF
Refer to "Entering and exiting the adjustment process mode" in the section 10-2 to enter the display process mode.
If there is a problem with a lamp or a lamp circuit, the lamp will go out. (The power LED is green.)
Then, you can check the operation to see if the lamp and lamp circuit are abnormal.
2) Resetting the lamp error count
After you have finished checking whether the lamp and lamp circuit are abnormal, reset the lamp error count. If a lamp error is detected five consecutive times, the power cannot be turned on.
Therefore, move to the [L ERR RESET] line, the 5th line on the first page of the "Display process mode", using the Cursor UP/DOWN key. Then, reset the [L ERR RESET] value using the Cursor RIGHT/LEFT key. In this case, press the Cursor UP/DOWN key to reset it to "0".

Hisense PDP3208 (TPW3208) – Service Mode – Software update – Troubleshooting - Plasma display television

Service mode

1. Press on the [MENU] key.
2. Select the sub-menu [PICTURE] with [CH∧/CH∨].(or sub-menu[SOUND])
3. Select the parameter [Brightness] with the keys [VOL∧/VOL∨]. (or balance)
4. Press a series of numbers [0] [5] [3] [2] quickly.
Note: The factory lock initial password is “0000”,the general password is “0532”

SERVICE MODE MENU includes: Fac. Menu. [Click on the pictures to zoom in]

Service hadn’t better amend factory data, because it is better settings data.  Do not tell user the purpose password.

Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on plasma monitor panel for a long time as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

A still image displayed too long may cause permanent damage to the PDP Panel

Watching the PDP TV in 4:3 format or other non full screen formats for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

Afterimage on the Screen Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages. To prevent this effect, reduce the brightness and contrast when displaying still images for a long time.

Height The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height and do not install and operate there.

Avoid operating the TV at temperatures below 5℃(41°F)

The signal board is composed by the main board .The main chip for video decoder is MST9E19A produced by MSTAR co., ltd.

Software updating

You can update the software through a special tool.

Connect the Debug board to the TV use VGA interface, then connect the Debug board to the computer, just as the pictures showing.

Set the ISP_TOOL4.0.9 -------only for the first time update.

DLPORTIO.dll and FTD2XX.DLL must be in the same folder

Find the folder where the ISP_TOOL4.0.9 lies in.

Note: DLPORTIO.dll and FTD2XX.DLL must be in the same folder

Double click the ISP_TOOL4.0.9 icon, and then a dialog will show as below.

Click the Config button. And then a dialog will show as below.  You should set the Config like what the picture shows

After you have finished all above, you should click the Apply button to complete the configuration.

Turn on the TV, then we can update.
Double click the ISP_TOOL4.0.9 icon, and then a dialog will show as below.

Click the Read button. And then do as shown below.

Find the update file in your computer.

Double click the update file. A dialog will show as below.

Click the Auto button. And then do as shown below.

Click the Connect button. And then do as shown below.

Click the Run button

When the update is finished, a dialog will show as below

Problem solutions
1. Adjusting sharpness can improve picture definition.
2. Adjusting bright can improve picture administrative levels; it can display black background something.
3. If VGA or YPBPR color isn’t natural. You can optimize VGA.
4. PDP power is very large system. As you power off power. Power component must discharge period of time. Power can work steadily. If you power off and power on TV continuously. Then power work unsteadily. Then PDP TV will display deviant picture.
5. TV, AV and S.video are the same white balance setting. VGA is a set white balance setting. HDTV is a set white balance setting.
6. Picture mode does be divided four modes. Such as standard, brightness, soft and custom. If you adjust factory data, they will increase the same data.

7. If TV doesn’t work normally, it will take place follow some phenomena.

8. If the picture color is not correct in the scart1 RGB source, but the scart1 CVBS is normal .you can check the fast blank signal is whether high. If it is low, please check the circuit.

9.If the picture is not normal 16:9 mode or 4:3 mode when the signal equipment send 16:9 mode or 4:3 mode, please check the aspect mode whether is in “normal” mode.

Sharp MX2000 – Sharp MX2700 Copier - How to upgrade the software – error list

DIGITAL FULL COLOR MULTIFUNCTIONAL SYSTEM – Sharp MX- 2300/2700 G - MX-2300/2700 N 

Firmware upgrade procedure

Purpose : Version-up

Function (Purpose) : Used to execute the firmware update.

Section : —

Item : Adjustment

Operation/Procedure

NOTE: To update the firmware, set DIP SW 2 on the MFP control PWB to ON.

1) Insert the USB memory into the machine.

* When USB is not connected, "INSERT A STORAGE FIRMWARE STORED ON" is displayed. When [OK] button is pressed, the display is shifted to the folder or file selection screen.

2) When a firmware update folder or file button is pressed, the display is shifted to the firmware update screen.

* The number of buttons depends on the number of files in the inserted USB memory.

A folder name or file name is displayed on the button.

If the folder name or file name is of more than 34 characters, only 34 characters are displayed.

For a folder name, "<DIR>" is displayed at the head.

* When [ .. ] button is pressed on the file selection screen, the display is shifted to the folder or file selection screen. On the folder or file selection screen, the keys are disabled.

* The path of the folder or file is displayed on the title section.

If the path is of more than 50 characters, only 50 characters are displayed.

3) The current version and the update version are displayed for each firmware.

4) When a button of the firmware to be updated is selected, it is highlighted.

* When the selected button is pressed again, its selection is canceled (normal display).

* When [ALL] button is pressed, all the buttons are selected and highlighted.

* If there is a page over [^], an active display is shown and the page moves up. If there is no page upward, the display grays out and the operation is invalid.

When there is a page under [v], the display becomes active and the page is shifted down. When there is no page under [v], the display grays out and the operation is invalid.

5) Press [EXECUTE] button.  [EXECUTE] button is highlighted, and [YES] and [NO] buttons are changed from gray-out display to active display.

* If no firmware button is selected, [EXECUTE] button is disabled.

6) Press [YES] button.

[YES] button is highlighted, and update of the selected firmware is executed.

* When [NO] and [EXECUTE] button are pressed, the display returns to the firmware select screen. At that time, the selected firmware remains highlighted, and [EXECUTE] button returns to the normal display.

7) After completion of update, the result is displayed.

When the operation is completed normally, "COMPLET" is displayed. In case of an error, "ERROR" and the firmware where the error occurred are displayed.

* The operation cannot be interrupted midway.

* When [OK] button is pressed, the machine is rebooted.

* When [CA] key is pressed on the folder or file selection screen or the file selection screen, the simulation is terminated.

* When [SYSTEM SETTINGS] key is pressed on the folder or file selection screen or the file selection screen, the display returns to the sub code entry screen.

* When [CA] key or [SYSTEM SETTINGS] key is pressed to exit the simulation on the file version display screen and the following screens before execution, the machine is rebooted.

Error code list and Update target data

Click on the charts to magnify

How to program UR4 DCT cable remote control

Operating Instructions Four 4 in 1 Cable Remote Control UR4-DCT

CABLE : Cable Converts

TV : Televisions

VCR : VCRs and DVD

AUX : Audio Receivers, DMX & DCR, TIVO, etc.

For TV/VCR combination unit, use following steps to operate the Volume control.

Press the [CBL] button and the [OK] button simultaneously for 3 seconds. The [CBL] button will light on for 20 seconds.

Press the [VOL+] button.

Press the [VCR] button. The LED will blink twice to confirm the programming.

Default State

Device Default: Motorola DCT series and CFT2200.

Channel Default: CABLE channel and number keys through the CABLE, with the option of controlling channel and number keys through the TV or VCR. Refer to section F for programming the channel and number keys through your TV or VCR.

Volume Default : CABLE volume and mute through the CABLE , with the option of controlling volume and mute through the TV or AUDIO.

System On/Off button

This button is designed to send out power commands for two, three or all four devices with one button press.

Three-Digit Code Programming Method

The remote control can be programmed by pressing in a three digit code number that corresponds to particular manufacturers and brands of Audio/Video equipment.
The three-digit code numbers are listed in the code table of the instruction manual.
STEP1 Turn on the equipment you wish to program. (TV, VCR, DVD or AUX).
STEP2 Press the [DEVICE] button (TV, VCR or AUX) to be programmed and the [OK] button simultaneously for 3 seconds. The device LED will turn on indicating the unit is ready to be programmed.
*Tip : The device LED will stay lit for 20 seconds. The next step must be entered while the LED is on.
STEP3 Point the remote control toward the equipment and enter the three-digit code number assigned to your brand from the code tables.
*Tip : The equipment will turn off when the correct three-digit code number has been entered. You can verify you have selected the correct code by pressing the [POWER] button, the equipment
should turn on or turn off.
*Note : If there is more than one three-digit number listed for your brand, try one code number at a time until your equipment turns off.
STEP4 Store the three-digit code number by pressing the same [DEVICE] button once again. The device LED will blink twice to confirm that the code has been stored.
*Note : Try all the functions on the remote control. If any of the functions do not work as they should, repeat fromStep 3 using the next three-digit code number from the same brand list.

Auto Search Method.
If the three-digit code numbers assigned to your brand do not turn off your equipment or the code tables do not list your brand, you can use the Auto Search Method to find the correct three-digit code number for your equipment by the following steps:
STEP1 Turn on the equipment you wish to operate.
STEP2 Press the [DEVICE] button (TV, VCR or AUX) to be programmed and the [OK] button simultaneously for 3 seconds. The device LED will turn on.
*Tip : The device LED will light on for 20 seconds. The next step must be entered while LED is on.
STEP3 Press the [CH+] or [CH-] button one step at a time or keep it pressed.  The remote will emit a series of Power ON/OFF commands. Release the [CH+] or [CH-] button as soon as the equipment turns off.
*Tip : You can verify that you selected the correct code by pressing the [POWER] button. The equipment should either turn on or turn off.
STEP4 Press the same [DEVICE] button to store the code. The Device LED will blink twice to confirm that the code has been stored.
To Find the Three Digit Code Number That was Stored in theDevice.
STEP1 Press the [DEVICE] button (TV, VCR or AUX) you wish to verify and the [OK] button simultaneously for 3 seconds.
*Tip : The device LED will turn on for 20 seconds. The next step must be entered while the LED is on.
STEP2 Press the [INFO] button.

The device LED will blink number of times indicating the number of each digit of the code number. Each digit is separated by a 1second interval of the LED being turned off.
Example : One blink, three blinks and eight blinks with an interval of 1second of LED being turned off,indicates the code number 138.
Note : Ten blinks is equal to the number 0.

Programming a second TV to AUX Mode.
STEP1 Press the [AUX] button to be programmed and the [OK] button simultaneously for 3 seconds.
*Tip : The device LED will turn on for 20 seconds. The next step must be entered while the LED is on.
STEP2 Press the [TV] button to pick up the TV code table.
STEP3 Point the remote control toward the equipment and enter the three-digit code number assigned to your TV brand from the code tables.
STEP4 Store the three-digit code number by pressing the [AUX] button once again. The device LED will blink twice to confirm that the code has been stored.
 Programming The System On/Off Button.
This is designed to program the System On/Off button so that it can send out up to four power on/off commands with one button press.
STEP1 Press the [CBL] button.
STEP2 Press the [SYSTEM] button and the [OK] button simultaneously for 3 seconds. The [CBL] button will turn on for 20 seconds.
STEP3 Press the [DEVICE] button and the [POWER] button you wish to store in the System On/Off button and repeat this until you stored all the power commands into the System On/Off button.

STEP4 Press the [CH+] button to save the power commands you stored.  The [CBL] button will blink twice to confirm the saving.

Programming Channel Control.
By following the steps below, the user can program the channel controls (channel UP, and channel DOWN) from one device to operate in another device mode. The default channel control settings on the remote control is as follows:
CBL : CBL T V : CBL
VCR : VCR AUX : AUX
If you wish to store the TV channel control in TV mode, use the following steps.
STEP1 Press the [TV] button and the [OK] button simultaneously for 3 seconds.
*Tip : The device LED will light on for 20 seconds. The next step must be entered while the LED is on.  STEP2 Press the [VOL -] button.
STEP3 Press the [TV] button. The device LED will blink twice to confirm the programming.
To return to original state:
If you wish to restore the CABLE channel control in TV mode, repeat the above steps by pressing [CBL] in STEP3 .
 Programming Volume Control .
By following the steps below, the user can program the volume controls (Volume UP, Volume Down and MUTE) from one device to operate in another device mode.  The default volume control settings on the remote control is as follows :
CBL : TV TV : TV
VCR : TV AUX : AUX
lf you wish to store the TV volume control in CBL mode, use the following steps.
STEP1 Press the [CBL] button and the [OK] button simultaneously for 3 seconds.

Tip : The device LED will light on for 20 seconds. The next step must be entered while the LED is on.
STEP2 Press the [VOL +] button.
STEP3 Press the [TV] button. The device LED will blink twice to confirm the programming.
To return to original state:
If you wish to restore the CABLE volume control in CBL mode, repeat the above steps by pressing [CBL] in STEP3 .

Programming For Advanced Function.
In the CABLE mode, the A, B and C buttons can be programmed to act as a macro or favorite channel button to send out up to 10 commands with one button press.
STEP1 Press the [CBL] button to select the CABLE mode
STEP2 Press the [A (or B,C)] button and [OK] button simultaneously for 3 seconds. The CBL device LED will turn on for 20 seconds.
STEP3 Press up to 10 buttons you wish to store. The CBL device LED will blink once for each command entered.
STEP4 Press the [CH+] button to store the functions that are selected. The CBL device LED will blink twice to confirm the storage of functions.
 LOW BATTERY WARNING.
When the battery is low and needs to be replaced with fresh batteries, the remote control LED will blink 2 times in sequence whenever a [POWER] button is pressed to turn on equipment.

 Memory Lock System.

  This remote control is designed to retain programmed memory for 10 years even after batteries are removed from the remote control.