Thursday, 14 March 2019

Mini compact system – Samsung MX H630 – SMPS schematic, wiring details, MPEG update, Power amplifier schematic, MICOM, MPEG Initialization and Update


MPEG Version Check
1) Power On.
2) CD open status.
3) Push the number NEXT for 5 seconds, check the MICOM version.
4) Push the number PREVIOUS for 5 seconds, check the MPEG version.
MPEG Update
1) Insert USB Memory or Update DISC which have Update file, and play. “Update” will be displayed.
2) When finish the Set will be power off > on automatically.
3) And then the Deck is automatically open.
MPEG Reset
During “No Disc” Displayed, push the stop Button 5 seconds. After displayed “INITIALIZE” set will power off automatically.
The inserting method of Region Code after replacing the Main PBA
When replacing the Main PBA and System Micom should be inserted the region code.
The set is not working properly if you don't insert the region code.
The region code is inserted by the remote control
During “AUX” status.
MX-H630 : Push the “ENTER” button 10 Second
When displayed ‘TEST”, import 46 to set the buyer
When displayed ‘– – – ’, import the buyer code.
The buyer setting code can find in the table named “H630 OPTION TABLE_Ver0.1”
It will show the buyer that you set up. Then the buyer setting is succeeded.
Wiring diagram 
AUX/MIC/USB/VOLUME/KEY Control 
Pin connections 
Power amplifier and mute schematic
SMPS schematic
Region option code
The Main Mpeg IC is ES8398ASA. SDRAM IC is M12L64164A. AMP IC is TAS5342.
The Main Mpeg controls each IC in this PCB.
Audio signal is come from CD Mecha, TUNER, AUX, MIC, BT.
Then MPEG IC encode them and sent them to AMP IC.
This signal go to the Crystal Amplifier(TAS5342). And amplified signal is Low Pass Filtered. This signal is real audio signal.