Software upgrade tooling, software upgrade instructions,
software initialization, parameter setting, software version and screen
matching instructions
Software upgrade tooling
There are three kinds of using upgrade
There are three kinds of using upgrade
tooling：
1.Use the combined interface(the parallel port) upgrade tooling :use the
upgrade program: ISP_ Tool V4.0.5.exe（and higher versions）
2.Use USB interface upgrade tooling , use the upgrade program : versions higher than ISP Tool V4.3
3. Use the USB upgrade.
2.Use USB interface upgrade tooling , use the upgrade program : versions higher than ISP Tool V4.3
3. Use the USB upgrade.
Tooling upgrade
1. Driver Installation: Upgrade tooling connected to the computer via USB, the
first connection will be prompted to find the hardware, follow the prompts to
install the driver, Driver file from the attachment "usb-update TOOL-DRIVER" folder inner tube MSTAR name of
the subfolder word where you can, you are prompted three times, to
be installed.
2. After installing the driver tooling, tooling and TV connected (switched on), open the upgrade tool "ISP_Tool V4.3.9.4.exe" (Note: The chart version of the tool used for the interception chart, the upgrade is still using V4 .3.9.4 version), run the upgrade program.
2. After installing the driver tooling, tooling and TV connected (switched on), open the upgrade tool "ISP_Tool V4.3.9.4.exe" (Note: The chart version of the tool used for the interception chart, the upgrade is still using V4 .3.9.4 version), run the upgrade program.
Cancel
the selection in the red line frame of the above picture, result showed as
follows:
3.
Click the button connect on the toolbar first, if normal, system wills feedback
a dialog box shows the flash style of the machine chassis As follows.
4.
Click the button Read on the toolbar, a button read appears, click it and then
select the upgrade file "CH-P06U (VC)-V1.15-YD12.bin"
5.
Click the button Auto, and check the options according to the following
picture.
6.
Click the button connect on the toolbar, if has been connected successfully,
there will popup a dialog box prompts the Device Type, click OK and then click
RUN.When the upgrade process finished, a green prompt "PASS “will appear in the progress bar below.
Use USB upgrade
Enter the factory menu, select Software Update to finish the upgrade.
Enter the factory menu, select Software Update to finish the upgrade.
Software initialization
After finishing the software upgrading, enter into the factory menu, select Default, clear EEPROM.
After finishing the software upgrading, enter into the factory menu, select Default, clear EEPROM.
The
system will automatically boost after clearing EEPROM.
Software version
Related program information can be read from the software version, which is useful to professional to know the software’s states.
Related program information can be read from the software version, which is useful to professional to know the software’s states.
Factory mode parameter setting
Enter
into the factory mode
Switch on TV set, and make it works normally:
1. Press SOURCE key on the remote control
Switch on TV set, and make it works normally:
1. Press SOURCE key on the remote control
2.
Press number keys “3” “1” “3” “8” on remote control to enter password. Finish
entering the factory mode. If you want to quit the factory mode, press POWER key
to switch off the TV.
1 Factory menu displays as bellow
1 Factory menu displays as bellow
2
Use the key▲/▼on remote control to select items that need to adjust, use the key﹥/﹤ to adjust them.
Setting method of factory menu
1 Select the setting item
Operators can choose setting item with P+ and P- key, font with background display means the item has been chosen.
1 Select the setting item
Operators can choose setting item with P+ and P- key, font with background display means the item has been chosen.
Press
V+ key to enter sub directory.
Use
P+ and P- keys on remote control to select up and down, then use V+ and V- keys
to set.
2 Most of the menu functions are open under factory mode, if needed , item checking and effect test can be done by using menu .
3 TV signal switching can be done by directly pressing the number keys in factory mode .
2 Most of the menu functions are open under factory mode, if needed , item checking and effect test can be done by using menu .
3 TV signal switching can be done by directly pressing the number keys in factory mode .
Press
MENU to back to the parental catalog, press EXIT to quit factory mode.
Simple
factory debugging specification
Clear
EEPROM, and set the parameters after upgrading according to the upgrade
instructions.
Check
the image and sound of each channel/source are normal (or abnormal).
