- Manually turn on the TV. Find the three-digit code for your TV in the code list.
- Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
- Press and release the TV button (The INDICATOR LIGHT will blink then remain lit).
- Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.
- Aim the remote at your TV and press the ON / OFF button. Your TV should turn off. Note: If your TV does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method.
- With your TV on, press CH+. If the TV responds, no further programming is required.
CODE SEARCH METHOD
If your TV, VCR, DVD, DBS or Cable Box does not respond
after you have tried all the codes for your brand, or if your brand is not
listed, try searching for your code by following the steps below.- Turn on the device you wish to program.
- Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH.
- Press and release the device button for the device you are programming (TV, VCR or DBS / CABLE). The INDICATOR LIGHT will blink once then remain lit. DVD codes are programmed under the VCR button.
Press and release ON/OFF until your device turns off. Important: You may have to press ON/OFF up to
200 times.
Retrieving Codes
If you need to find the three-digit code for your TV, VCR,
DBS, DVD or Cable Box after your device is set-up using Code Search, use this
procedure.
- Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH.
- Press and release the device button for the device’s code you are retrieving (TV, VCR or DBS/CABLE). The INDICATOR LIGHT will blink once then remain lit. Note: For AUX, press DVD•AUX then the device button for the code you are retrieving.
- Press and release CODE SEARCH. The INDICATOR LIGHT will turn off.
- Starting with 0 on the keypad, press the number buttons in order (0-9) until the INDICATOR LIGHT blinks.
- The number that causes the INDICATOR LIGHT to blink is the first digit of your code.
- Repeat step 4 until you have retrieved all three numbers in the code.
