CHECKMATE RT U50 - Universal Remote Control - Troubleshooting Hints

TROUBLESHOOTING

This  remote is equipped with 2 quick- programming labels on the back of its case.

• Point and Press  Programming- This will help you quickly program the remote without using codes.
• Mode-Lock.  Your model RT-U50 comes “locked” in its cable-operating mode. To operate more functions on your TV, VCR, DVD and audio devices, you can unlock your remote using the simple instructions on the back of your remote.

The illuminated mode button will remain on while the remote is in a programming mode. In the absence of an entry, the button will go out after approx. 20 seconds.  When locking in your devices, the illuminated mode button will blink and go out.

When using the Point and Press programming method, you may find a code that turns your device off but not back on. If this happens…

1. the correct code has not been found. Continue pressing [CH ▲] until your devices turn on and off.
2. you may have gone past the correct matching code. Try pressing [CH ▼] one-step at a time until find a code that turns your cable set-top terminal back on.

NOTE: If you have a Scientific Atlanta 8500 series cable set-top terminal, press [CH ▼] or [CH▲ ] to turn on the cable set-top terminal. Press [CABLE] to turn these cable set-top  terminals off.

If you have any questions concerning the operation of your cable set-top terminal, contact your cable operator.

Your remote control has Memory Guard, which eliminates reprogramming after battery changes.