PHILIPS MAGNAVOX PM-725 - REMOTE CONTROL - SETUP PROCEDURE

SETUP PROCEEDINGS [DIRECT CODE ENTRY METHOD]

• Press and hold the Code Search button until the red indicator stays on. Release the Code Search button.
• Press and release the desired mode button (TV, VCR,etc.).  The red indicator blinks, then stays lit.
• Enter the 3 digit code from the code tables. Note: after a valid code entry, the red indicator turns off.  For an invalid code, the red indicator flashes.
• With your device on, press CHANNEL Up. If the device responds, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand.

CODE SEARCH METHOD

1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.
3. Press and release the desired mode button (TV, VCR,etc.).  The red indicator blinks, then stays lit.
4. Press the Channel Up button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again.  Press and release the Mute button to install the code.

The above assumes that you want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure and try ANY CBL code from the code tables, e.g. press CBL in step 2, and then enter ANY VCR code. Then follow the steps above.

If the device does not have a Channel Up button, use Play (VCR only) or Power instead. Code Search starts from the currently stored three digit number under that mode e.g. if the mode has 100 codes and the currently stored code is 050 then the Code Search starts from 051 continuing to 100 before looping back to 000

and finishing at 050. This simplifies the process if you find that several preprogrammed codes operate your device by allowing you to bypass codes already tried.

CODE IDENTIFICATION

1. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.
2. Press and release the desired mode button (TV, VCR,etc.).  The red indicator blinks, then stays lit.
3. Press and release the Code Search button. The indicator light blinks off.
4. To find the first digit for the code stored under the mode key pressed in step 2, press each numeric key from 0-9 in turn. When the indicator light blinks off the number you pressed is the first digit for the code you are searching for.
5. To find the second digit, repeat step 4, this time when the indicator light blinks off this is the second digit.
6. Repeat step 4 again to find the third digit.

SLEEP TIMER SETTING

• The Sleep feature enables the remote to turn off the TV after a period of 1 to 99 minutes. Remote is to be in TV mode to set a Sleep Timer. This feature works even if your TV does not have this feature.
• Press and release the TV Mode key.
• Press and hold the Sleep button until LED remains on (occurring after approx. 2-3 seconds).
• Release Sleep button.
• Press and release the numeric keys (01-99) for the time required. The LED will blink off to indicate key press acceptance and remain off after second key press.
• TV Sleep Timer now set.
• Leave the Remote pointing towards the TV with an unobstructed path.  To cancel the Sleep Timer, press and hold the Sleep key until the LED blinks or press and release the Power key in TV Mode.

LEARNING COMMANDS

1. Press and hold the Code Search button until the red indicator stays on. Release the Code Search button.
2. Press the mode button for the type of device you want to learn (TV, VCR, Cable, etc.). The indicator lights blinks off once.
3. Press the Learn button.
4. Press the button on the Learning Remote that you want to teach, e.g. Power.
5. Point both remotes at each other. Press and hold the Original Remote button that you want to learn, e.g. Power, until the indicator light turns off. If there is a problem with learning, the indicator light blinks for three seconds but the remote remains in the Learning mode. If this happens, repeat from Step 4.
6. Repeat Steps 4 and 5 for other buttons you want to learn.
7. Press and release the Code Search button when all desired original remote commands are learned. Code Learning is now complete.

Note :- No functions may be stored under the Code Search button, any mode button, AUX button, or the Learn button.

TIPS ON LEARNING

• Use fresh batteries for both the Learning Remote and the Original Remote.
• Perform a Master clear before learning.
• Place the original remote end-to-end with the Learning Remote so the IR transmitters on both remotes are directly in line with each other. Keep the two remotes approximately one inch away from each other.
• Experiment by learning 2 or 3 commands initially (to ensure compatibility and familiarity) and then carry out a Master Clear before completely learning your original remote’s commands.
• Do not try to learn directly under an incandescent or low-energy light as these can cause interference with learning. Keep at least three feet away from any such light sources.

TO CLEAR LEARNED COMMANDS

• Press and hold the Code Search button until the indicator light turns on. Release the Code Search button.
• Press and release the button for the mode you want to clear (TV, VCR, etc.). The indicator blinks off.
• Press and release the Learn button TWICE. The indicator blinks off.
• Press and release Code Search. The indicator blinks off. All learned Commands under that mode are now cleared.

TO RETURN TO FACTORY RESET

1. Press and hold the Code Search button until the indicator light turns on. Release the Code Search button.
2. Press and release the Learn button TWICE. The indicator blinks off.
3. Press and release Code Search. The indicator blinks off.  All Learned commands in the remote are now cleared.

                                                               >>For More>>