HOW TO ENTER SERVICE MODE TO APEX PF2425 - CRT TV

• Decrease the volume to '0' with remote control.
• Press and Hold "Mute" button on the remote control, and "Video" button on the TV panel at the same time.
• "S" appears on the TV screen indicating that the TV is in Service Mode.
• Press "Up/Dn & "--> / <--" button to adjust the data.
• Press 'Power' button on the remote control to 'Exit' Service Mode.

                                                                                   

For More 

HOW TO ENTER SERVICE MODE TO SCHNEIDER - TV17XL4_TV17ZL7

• Press buttons [Mute => 'red' => TV] on the remote control one after another in sequence.
• User 'red' button to select a menu line of digit.
• Press 'Up | Dn' button to select further parameter.
• Press 'Vol Up | Vol Dn' button to change the data value to selected item.
• Press "OK' button to store the changed data to memory.
• Press 'TV' button to exit Service Mode.

for more visit this site

HOW TO ENTER SERVICE MODE TO SCHNEIDER - 30M91 LCD TV

• Set language to English.
• Press "i" key.
• Enter digits [6 4 0 5].
• Press '1' and '2' key to see service menu.
• Press 'Exit' to exit.

for more visit this site

HOW TO UNLOCK PARENTAL[V-Chip] PASSWORD TO _ Poloroid - FLM 40_40 Series LCD TVs

The Factory preset passwords to these sets are '0000'.  This password must be used first before setting your own personal password.  It is recommended that to keep the personal password in a safe place and away from children.  In the event you loose the password, the master password is [8202].  This master password overrides all passwords.  Remember that, this password cannot be changed by anyway, and keep it in a safe place.   

If the Picture-in Picture will not work using component-1 and Component-2 as the input sources? Set the TV to its original factory settings.

Factory Mode Procedure

• Power On the TV.
• Press [Volume Up ] & [Channel Up] buttons simultaneously and release them.
• Power Off TV with remote or Power button to 'Exit'.

Click on image.  Right click on the enlarged image, save image as, to 'My Pictures' folder.  View it in ‘Picasa’ picture viewer.  There you can enlarge it more.  Download ‘Picasa-3’ by Google site, and install it to your system.  It’s a  free software from Google. 

HOW TO ENTER SERVICE MODE TO TOSHIBA TV

• Press "Mute" & 'Menu" buttons on the remote control simultaneously.
• Press "Menu"' button on the remote control, and enter {4 => 7 => 2 => 5}
• Press 'Volume Down' button on the front panel of the TV and press and hold digit '9' on the remote control.

OR

• With No Menu displayed on the panel, press 'AV" & "F' buttons simultaneously.
• Enter code {1 => 0 => 4 => 8} by the remote control.

OR

• Press 'Mute' button on the remote control.
• Press 'Mute' button again.  While keep pressing the 'Mute' button, press "Menu" button on the TV SET.
• "S" will be displayed at top right corner of the screen.
• Press 'TV (ANT) / VIDEO" button on TV; to get a single Horizontal Line On | Off [to adjsut screen voltage]
• Press 'TV (ANT) / VIDEO' button on the Remote Control; to select internal Test Signals.
• Use 'Ch Up | Ch Dn' buttons to call an item to adjust.
• Use 'Vol Up | Vol Dn' buttons to adjust the data value to selected item.
• To make adjustment menu On \ OFF, press 'Menu' button.
• To 'initialize' the memory IC (QA02), press "Recall + Channel Up" button on the 'TV'.
• Press 'Recall + Channel Dn" button on the 'TV', to initialize self diagnostic data. 

JVC - SERVICE MODE [FACTORY MODE]

• Simultaneously press "Display" & "Video Status" buttons on the remote cotnrol.
• Use 'Menu Up' & 'Menu Dn' button to select an item to adjust.
• To change the data value to selected item, use ( > ) or ( < ) button on the remote control.
• Press "EXIT' button to 'Exit' from service mode.