Your new AT6400 All Touch Infrared (IR) Universal Remote Control (remote) is a true universal remote, functioning as four remotes in one. As one example, you can use this remote to operate your Set Top Box, your TV, and two other devices, such as a DVD player and VCR.
1. IMPORTANT INFORMATION ABOUT
YOUR REMOTE
Your remote is
initially programmed to only operate your set top box. Therefore, you must
program the remote to operate your TV, VCR, DVD, or other devices. See PROGRAM THE REMOTE TO CONTROL MY
DEVICES to
learn how to enter device codes and program your remote.
NOTE:
You
must use the IR remote within line of sight of the set top box to operate the
set top box correctly.
HOW DOES A UNIVERSAL REMOTE CONTROL WORK
You
tell the remote which type of device you want to operate using the four keys
arched across the top of the remote. These keys, known as mode keys, are labelled
STB (Set Top Box), TV, DVD, and AUX.
Each mode key is associated with a specific device. As an example, after
programming the remote, if you want the remote to operate your TV, you simply
press the TV key. Other keys you press on the remote, thereafter, should
operate your TV.
Want to switch the
remote to operate a different device Just press the mode key for the next device you want to operate. In this guide,
you will learn which types of devices you can control and how to program the
remote to control your specific devices.
3. WHERE TO START
Before
you begin using your remote, complete the following initial setup tasks.
INSTALL THE BATTERIES
The remote requires two
AA batteries (alkaline recommended). A diagram in the battery compartment of
the remote indicates proper placement of the batteries. When the batteries are properly
installed, the light on the remote blinks each time a key is pressed.
Use
the Remote Control Quick Reference section on Page 12 of its user guide to
familiarize yourself with the remote and the functions of its various keys.
Knowing the function and location of the keys on the remote will assist you
when you are programming the remote.
4. PROGRAM THE REMOTE
To
learn how to program your remote, refer to the sections What Devices Can Control, What Devices Do Want to Control, and Program The Remote To Control Devices for further instructions.
5. FIND A PLACE TO STORE YOUR REMOTE
Keeping
up with one remote is much easier than keeping up with four or five remotes. The AT6400 is not a toy. It should be kept out of the reach of children under
the age of 6 years.
6. PROGRAM THE REMOTE TO CONTROL TO DEVICES
The remote is initially programmed to only operate Set Top Box. You will need
to set up the remote to operate your other devices using its TV, DVD, VCR, and
AUX modes. The TV key may be programmed to operate a standard or
high-definition television (HDTV). The DVD key may be programmed to operate a
DVD player. The AUX key may be programmed to operate a VCR, a receiver, an
amplifier, or a Home Theatre in a Box (HTIB) system. If the remote provides
only limited functionality for a device, you can look for a code that provides
more functionality. Refer to the code tables at the end of this guide to locate
additional programming codes.
Note: You have the
option to assign some remote keys to operate one device type only. For example,
you may want to assign volume control to the TV only. If this is the case, you
can reprogram power, volume, and channel control using procedures found later
in this guide.
7. ASSIGNING A DEVICE CODE TO A MODE KEY
NOTE: If your device is not listed, you may be
able to program the remote using the Auto-Search function..
1.
Turn on the device that you want to assign a mode key.
2. Press and hold the appropriate mode key (TV, DVD, or AUX) on the remote, and
then press and hold the OK key.
3. Release both keys and the mode keys blink twice.
4. Enter the first 4-digit setup code for the device using the numeric keys
(0-9) on the remote.
The mode key blinks three times to indicate that the code entry was accepted.
NOTES:
•
When an invalid code is entered, the selected mode key displays a long flash to
indicate that you have not entered the code correctly.
• Should the remote time-out before you complete the code setup, you must start
over.
This is indicated by one long flash of the red LED.
6. Did the device power off?
• If YES, write this code number in the table found on page 38. You may need it again if the device code is accidently erased.
• If NO, repeat this procedure from step 3 using a different setup code.
NOTE: If none of the codes listed for your brand of device operate the device correctly, go to What If None of the Codes Work for instructions.
7. Repeat this procedure for each mode key you want to program.
8. WHAT IF NONE OF THE CODES WORK
If none of the codes listed for your brand of device operate the device correctly, or if your device is not listed in the codes table, you can use the Auto-Search function to search through the code library for a valid code. This section provides procedures for using the Auto-Search function to search the code library for TV, DVD, and AUX mode codes.
NOTE: Read the procedures in this section thoroughly before beginning. You need to be prepared to observe the behavior of the remote.
AUTO-SEARCH FEATURES
Consider
the following items when using Auto-Search:
• The Auto-Search function begins searching from the first code.
• If a valid code is not found, the green backlight blinks twice and the remote
returns to normal operation.
• If any other key is pressed except PLAY, ENTER, POWER, EXIT, REW, FF, or
numeric keys 1 through 4 (when programming the AUX mode key), the mode key
displays a long red flash (error message) and the remote returns to normal
operation.
• Should the remote time-out before you complete the Auto-Search function you
must start over. This is indicated by one long flash of the red LED.
• If the device is not listed and the Auto-Search function is unable to find a
usable code, you may need to use the original remote provided with the device.
AUTO-SEARCHING THE CODE LIBRARY FOR TV OR DVD MODE
CODES (Program Code 922)
NOTE: This procedure
only applies to TVs and DVDs.
1.
Turn on the device that you want to assign to the TV or DVD key.
2. Point the remote at
the device.
3. Press and while holding a selected mode key (TV or DVD), press the OK key.
For example, to search for a TV code, press and hold TV and OK at the same
time.
4. Release both keys and all the mode keys will blink twice.
5. Enter the programming code 922 by pressing the numeric keys on the remote.
The mode key you selected in step 3 blinks twice to indicate a successful
entry.
6. Point the remote toward the device, and press PLAY.
7. Your device powers off when it finds the correct code. Then, choose one of the
following options:
• Save code and exit – Press the ENTER key on the remote to program the code in
the remote and the mode key flashes three times indicating successful entry.
• Step forward – Press the fast-forward (FF) key on the remote to step ahead through
the codes one at a time. Then, return to step 6.
• Step backward – Press the rewind (REW) key on the remote to step back through
the codes one at a time. Then, return to step 6.
• Exit without saving the code – Press the EXIT key on the remote. The selected
mode key flashes three times and returns to normal operation.
• Send the current code – Press the POWER key on the remote to send the current
code. If the device turns back on, press the ENTER key. If the device does not
turn on, return to
step 6.
• Continue with auto-search function – Press the PLAY key on the remote to
continue with the auto-search function. Then, return to step 6.
AUTO-SEARCHING
THE CODE LIBRARY FOR AUX MODE CODES (Program Code
922)
1. Turn on the device that you want to assign to the AUX key.
2. Point the remote at the device.
3. Press and while holding the AUX key press the OK key.
4. Release both the AUX and the OK keys and all the mode keys will blink twice.
5. Enter the programming code 922 by pressing the numeric keys on the remote.
The AUX key blinks twice to indicate a successful entry.
6. Press the PLAY key, choose one of the following device categories and then,
using the number keys on the remote, press its assigned number (1-4) based on
the following list:
1. = VCR
2. = Receiver/Tuners
3. = Amplifiers
4. = HTIB (Home Theatre in a Box)
7. Point the remote toward the device, and press PLAY.
8. Your device powers off when it finds the correct code. Then choose one of
the following options:
• Save code and exit – Press the ENTER key on the remote to program the code in
the remote and the mode key flashes three times indicating successful entry.
• Step forward – Press the fast-forward (FF) key on the remote to step ahead
through the codes one at a time. Then, return to step 7.
• Step backward – Press the rewind (REW) key on the remote to step back through
the codes one at a time. Then, return to step 7.
• Exit without saving the code – Press the EXIT key on the remote. The selected
mode key flashes three times and returns to normal operation.
• Send the current code – Press the POWER key on the remote to send the current
code. If the device turns back on, press the ENTER key. If the device does not
turn on, return to step 7.
• Continue with auto-search function – Press the PLAY key on the remote to
continue with the auto-search function. Then, return to step 7.
9. REASSIGN MODE KEYS
You
can reassign a mode key to operate a different device. For example, you can
reassign the AUX key to operate a DVD player or a TV. If you reassign a key, be
sure you update the table found on page 38.
REASSIGNING MODE KEYS (Program
Code 944)
1. Press and hold the STB key on the remote control.
2. Without releasing the STB key, press and hold the OK key.
3. Release both keys and all mode keys blink twice.
4. Enter the programming code 944 by pressing the numeric keys on the remote.
The STB key blinks twice indicating a successful entry.
5. Press and release the mode key associated with the type of device you want
to control, and then press and release the mode key that you want to change.
The newly assigned mode key blinks one time indicating a successful entry.
Some
common examples:
•
To program the AUX key to operate your DVD player, press DVD and then AUX.
• To program the DVD key to operate your TV, press TV and then DVD.
10. CHANGE VOLUME CONTROL
By
default, once the TV mode key is programmed with a valid code, the volume and
mute buttons control your TV. These keys adjust the volume of your TV higher,
lower, or temporarily switch the volume off (Mute), regardless of whether the
remote is in STB, DVD, or AUX mode.
If you prefer, you can choose to have the volume and mute buttons always
control a different device rather than your TV, such as a home theatre
receiver. (See Controlling Volume for One Device below.) Note that you must
first program one of the mode keys, such as AUX, with a valid code for that
device.
Alternatively, you can choose to have the volume and mute buttons control
different devices when the remote is in different modes. For example, you might
want to control the volume on your TV when in TV mode, but the volume on your
home theatre receiver when in AUX mode. (See Controlling Volume for Different
Devices below.) Note that not all devices have volume controls, so if you
choose this option, the volume and mute button may do nothing in some modes,
such as STB and DVD.
CONTROLLING VOLUME FOR ONE DEVICE (Program Code 955)
1. Press and hold the STB key on the remote control.
2. Without releasing the STB key, press and hold the OK key.
3. Release both keys and all mode keys blink twice.
4. Enter the programming code 955 by pressing the numeric keys on the remote.
The STB key blinks twice indicating a successful entry.
5. Press and release the mode key for the device you want the volume keys to
control. For example, if you want to control volume through your TV, press and
release TV. The selected mode key blinks three times to indicate a successful
entry.
6. The volume keys now control only one device whether you are in STB, TV, DVD,
or AUX mode.
CONTROLLING VOLUME FOR DIFFERENT DEVICES (Program Code 955)
Complete steps 1 through 4 of the Controlling Volume for One Device procedure.
Press and release the ENTER key. The STB mode key blinks three times to
indicate a successful entry.
After you press the
ENTER key, the volume keys control the device assigned to that mode. For example,
in TV mode, the volume keys control volume for the TV only.
NOTES:
•
If any other key is pressed except the Mode keys and the ENTER key, the remote
does not accept any changes or updates. The STB mode key displays a long red
flash and the remote returns to normal operation.
• If the remote times out before you complete programming volume control, the
remote does not accept any changes. You must start over from step 1 of this
procedure.
11. CHANGE CHANNEL CONTROL
The
remote is set by default to control channel selection on the Set Top Box. You
can also program channel control to control any of the TV, DVD, or AUX mode
devices provided the device allows for channel control assignment. Or, you can
set the channel selection control programming to control channels (or page up
or down) for all of the devices programmed in the four mode keys. Otherwise, you
can only control channels (or page up or down) on a specific device, for
example, the TV or DVD.
NOTE: The channel
control keys include CH/Page, Jump, and the numeric keys 0-9.
CONTROLLING CHANNELS FOR ONE DEVICE (Program Code 966)
1. Press and hold the STB mode key on the remote control.
2. Without releasing the STB key, press and hold the OK key.
3. Release both keys and all mode keys blink twice.
4. Enter the programming code 966 by pressing the numeric keys on the remote.
The STB mode key blinks twice to indicate a successful entry.
5. Press and release the mode key for the device you want the channel key to
control. For example, if you want to control channels on your TV, press and
release TV. The selected mode key blinks three times to indicate a successful
entry. The channel key now always
controls the device associated with the mode you selected in this procedure,
whether in STB, TV, DVD, or AUX mode.
CONTROLLING CHANNELS FOR DIFFERENT DEVICES (Program Code 966)
Complete steps 1 through 4 of the Controlling Channels for One Device
procedure.
Press and release the ENTER key. The STB mode key blinks three times to
indicate a successful entry.
After you press the
ENTER key, the channel key now controls the device associated with the mode key
you select. For example, in TV mode, the channel key controls the TV, but in STB
mode, the channel key controls the Set Top Box.
NOTES:
•
If any other key is pressed, except the Mode keys and the ENTER key, the remote
does not accept any changes or updates. The STB mode key displays a long red
flash and the remote returns to normal operation.
• If the remote times out before you complete programming channel selection
control, the remote does not accept any changes. You must start over from step
1 of this procedure.
12. CHANGE POWER CONTROL
The
POWER key on the remote is set by default to control the power switch on one
device at a time, in either mode (STB, TV, DVD, or AUX). When in STB mode, the
remote switches the Set Top Box from OFF (standby mode) to ON, or from ON to
OFF (standby mode). However, you can alternatively program the POWER key to
control the power switch on up to four devices at the same time, instead of
controlling one device at a time. It is highly recommended that you set up the
POWER key to turn on and off your Set Top Box and your TV at the same time.
Turning off the Set Top Box saves electricity and extends the life of the box.
When turned off, the Set Top Box can still record scheduled programs
on its DVR and perform any other necessary functions.
CONTROLLING POWER FOR MULTIPLE DEVICES AT ONCE (Program Code 977)
1. Press and hold the STB key on the remote.
2. Without releasing the STB key, press and hold the OK key.
3. Release both keys and all mode keys blink twice.
4. Enter the programming code 977 by pressing the numeric keys on the remote.
The STB mode key blinks twice to indicate a successful entry.
5. For the first device, press the STB key. The STB mode key blinks twice.
6. For the second device, press the applicable mode key (TV, DVD, or AUX). The
selected mode key blinks twice.
7. Repeat step 6 for up to two more devices (total of four devices).
8. Press the ENTER key to complete the power switch control programming. The
last selected mode key blinks 3 times to indicate a successful entry.
Example: If you press only TV in steps 6 and 7, the
POWER key controls both the Set Top Box and the
TV at the same time, regardless of which mode the remote is in (STB, TV, DVD,
or AUX).
CONTROLLING POWER FOR ONE DEVICE AT A TIME (Program Code 977)
Complete steps 1 through 4 of the Controlling Power for Multiple Devices at
Once procedure.
Press the ENTER key to complete the power switch control programming. The last
selected mode key blinks 3 times to indicate a successful entry.
After you select a mode,
the POWER key controls the device assigned to that mode. For example, in TV
mode, the remote controls power for the TV only.
NOTES:
•
If any other key is pressed except the Mode keys and the ENTER key, the remote
does not accept any changes or updates. The STB mode key displays a long red
flash and the remote returns to normal operation.
• If the remote times out before you complete programming power switch control,
the remote does not accept any changes. You must start over from step 1 of this
procedure.
13. PUT IT BACK THE WAY I GOT IT
You
can return all advanced functions back to their original settings by resetting
the remote to factory default settings. Resetting the remote to factory default
settings removes all of the programming you have entered for the remote. You
must reprogram the remote to restore your settings.
RESETTING THE REMOTE TO FACTORY DEFAULT SETTINGS (Program Code 900)
1. Press and hold the STB mode key on the remote.
2. Without releasing the STB key, press and hold the OK key.
3. Release both keys and all mode keys blink twice.
4. Enter the programming code 900 by pressing the numeric keys on the remote.
The STB mode key blinks four times to indicate you have successfully reset the
remote to factory default settings.
NOTES:
•
If any other key is pressed except the numeric keys, the remote does not accept
any changes or updates. The STB mode key displays a long red flash and the
remote returns to normal operation.
• If the remote times out before you complete programming power switch control,
the remote does not accept any changes. You must start over from step 1 of this
procedure.
14. TROUBLESHOOTING
If
there is no response when you press the keys on the remote, please check the
following items before calling for service.
CHECK THE BATTERIES
•
Are the batteries inserted correctly?
• Check the battery condition for leakage.
• Replace with new alkaline batteries.
CHECK THE DEVICE
•
Is the device’s power cord connected to the power outlet?
• Is the device switched on?
CHECK THE IR DATABASE CODES LIST
•
Is the device brand name for the device listed in the code list?
• If yes and there is more than one code listed, try using a different code to
provide more functionality.
• If no, try the following:
- Use the Auto-Search function to find a usable code.
- If the Auto-Search function is unable to find a usable code, you may need to
use the original remote provided with the device.
15. CODE TABLES
If
the remote does not recognize your device, you can find codes for your device
by brand name.
With combination devices (such as a TV with a built-in DVD player), there are
separate codes for each device component. Therefore, for ease of use, the
combination device codes are listed first. All other code tables in this
section are organized by the devices assigned to each mode (TV, DVD, and AUX).
16. COMBINATION DEVICE CODES
If
you have a combination device, you may need to reassign the AUX key to operate
one of the devices, for example, the VCR. The tables on the following pages
provide some examples of combination devices. If your combination device is not
listed, simply look for the codes for each separate device.
All-In-One Cisco Cable Box Remote codes
- 0498
- 0496
- 0497
- 0567
- 0506
- 0543
- 0535
- 0512
- 0509
- 0466
- 0455
- 0496
Dynex
1593, 1589, 1507, 1609
Emerson 1465, 1020, 1043, 1135, 1028, 1023, 1036, 1333,
1024, 1118, 1595,
GE
1000, 1094, 1049, 1135, 1333, 1021, 1063, 1512, 1068, 1558, 1380
Hitachi
1030, 1522, 1051, 1001, 1098, 1102, 1363, 1086, 1490, 1344, 1206,
Insignia 1255, 1519, 1024, 1232, 1437, 1507, 1593, 1595,
1596, 1601, 1436
JVC 1023, 1092, 1054, 1055, 1169,
1526, 1026, 1080, 1615
LG 1255, 1020, 1333, 1257, 1539,
1146, 1584, 1638, 1303, 1723, 1294, 1293.
Magnavox 1633, 1576, 1047, 1049, 1061, 1632, 1457,
1595, 1027, 1300, 1145,
Memorex 1043, 1023, 1032, 1333, 1001, 1022, 1593,
1121, 1305, 1165, 1725
Mitsubishi 1005, 1009, 1032, 1333, 1018, 1535, 1540,
1153, 1279, 1284, 1282,
Panasonic 1466, 1096, 1469, 1049, 1169, 1554,
1010, 1564, 1385, 1305, 1165,
Philips Magnavox 1772
Philips 1633, 1576, 1047, 1126, 1239, 1549, 1337, 1632,
1234, 1785, 1226,
Pioneer 1469, 1102, 1149, 1377, 1336, 1339, 1342,
1343, 1346, 1338, 1345,
Polaroid 1565, 1111, 1639, 1391, 1604, 1596,
1502, 1371, 1583, 1393, 1407,
RCA 1144, 1000, 1094, 1049, 1009,
1640, 1613, 1610, 1596, 1459, 1386
Samsung 1314, 1073, 1156, 1333, 1061, 1161, 1173,
1547, 1530, 1172, 1169,
Sansui 1023, 1024, 1064, 1593, 1090, 1121, 1382, 1114,
1256, 1263, 1251,
Sanyo 1047, 1043, 1095, 1527, 1062, 1380
Sharp 1138, 1009, 1011, 1025, 1064, 1350, 1537,
1153, 1378, 1248, 1247,
Sony 1037, 1219, 1534, 1574, 1090,
1388, 1408, 1515, 1814, 1812
Sylvania 1465, 1047, 1061, 1024, 1059, 1554,
1150, 1464, 1145, 1300, 1027,
Toshiba 1159, 1043, 1058, 1223,
1255, 1073, 1222, 1532, 1340, 1550, 1169,
Vizio 1829, 1433, 1181, 1184, 1042,
1824, 1289, 1625, 1822, 1823, 1831,
Westinghouse 1515, 1135, 1184, 1544, 1555, 1178, 1567,
1616, 1816, 1198.
Zenith 1037, 1255, 1094, 1020, 1023, 1333, 1061,
1522, 1051, 1015, 1118.
TV
codes
Dynex
1593, 1589, 1507, 1609
Emerson
1465, 1020, 1043, 1135, 1028, 1023, 1036, 1333,
1024, 1118, 1595, 1027, 1382, 1145, 1121, 1150, 1106, 1512, 1101, 1102, 1018,
1011, 1022, 1124, 1749, 1120
GE
1000, 1094, 1049, 1135, 1333, 1021, 1063, 1512,
1068, 1558, 1380, 1153, 1385, 1386
Hitachi
1030, 1522, 1051, 1001, 1098, 1102, 1363, 1086,
1490, 1344, 1206, 1328, 1090, 1268, 1195, 1192
Insignia
1255, 1519, 1024, 1232, 1437, 1507, 1593, 1595,
1596, 1601, 1436
JVC
1023, 1092, 1054, 1055, 1169, 1526, 1026, 1080,
1615
LG
1255, 1020, 1333, 1257, 1539, 1146, 1584, 1638,
1303, 1723, 1294, 1293, 1718, 1701, 1720, 1721, 1332, 1722, 1327, 1307
Magnavox
1633, 1576, 1047, 1049, 1061, 1632, 1457, 1595,
1027, 1300, 1145, 1090, 1183, 1553, 1329, 1239, 1141, 1528, 1007, 1022, 1059,
1238, 1650, 1235, 1237, 1769 , 1217, 1286, 1751, 1747, 1740, 1230
Memorex
1043, 1023, 1032, 1333, 1001, 1022, 1593, 1121,
1305, 1165, 1725
Mitsubishi
1005, 1009, 1032, 1333, 1018, 1535, 1540, 1153,
1279, 1284, 1282, 1281
Panasonic
1466, 1096, 1469, 1049, 1169, 1554, 1010, 1564,
1385, 1305, 1165, 1123, 1651, 1654, 1659, 1655, 1657, 1664, 1670, 1663, 1730,
1713, 1666
Philips Magnavox
1772
Philips
1633, 1576, 1047, 1126, 1239, 1549, 1337, 1632,
1234, 1785, 1226, 1221, 1212, 1774, 1213, 1202, 1216, 1791, 1273, 1205, 1201,
1779, 1794, 1819, 1793
Pioneer
1469, 1102, 1149, 1377, 1336, 1339, 1342, 1343,
1346, 1338, 1345, 1335, 1334
Polaroid
1565, 1111, 1639, 1391, 1604, 1596, 1502, 1371,
1583, 1393, 1407, 1460, 1232 , 1040, 1392, 1446, 1078
RCA
1144, 1000, 1094, 1049, 1009, 1640, 1613, 1610,
1596, 1459, 1386, 1385, 1153, 1380, 1586, 1558, 1552, 1548, 1546, 1068, 1149,
1118, 1067, 1065, 1082, 1102, 1018, 1220, 1426, 1804, 1801, 1758
Samsung
1314, 1073, 1156, 1333, 1061, 1161, 1173, 1547,
1530, 1172, 1169, 1490, 1363, 1011, 1098, 1018, 1360, 1375, 1418, 1355, 1321,
1366, 1367, 1349, 1318, 1356, 1405, 1313, 1399, 1358, 1369
Sansui
1023, 1024, 1064, 1593, 1090, 1121, 1382, 1114,
1256, 1263, 1251, 1269, 1252, 1260
Sanyo
1047, 1043, 1095, 1527, 1062, 1380
Sharp
1138, 1009, 1011, 1025, 1064, 1350, 1537, 1153,
1378, 1248, 1247, 1678, 1673, 1677, 1674, 1691, 1696, 1688, 1671, 1672, 1684,
1693, 1685, 1682, 1700, 1676, 1689, 1686, 1692, 1697, 1690
Sony
1037, 1219, 1534, 1574, 1090, 1388, 1408, 1515,
1814, 1812
Sylvania
1465, 1047, 1061, 1024, 1059, 1554, 1150, 1464,
1145, 1300, 1027, 1595, 1744, 1746, 1420, 1748, 1708, 1706, 1710, 1711, 1745
Toshiba
1159, 1043, 1058, 1223, 1255, 1073, 1222, 1532,
1340, 1550, 1169, 1012, 1341, 1560, 1179, 1377, 1267, 1114, 1006, 1154, 1597,
1408,1473, 1470, 1509, 1647, 1820, 1646, 1835, 1821, 1429, 1447, 1444, 1458, 1462,
1496, 1486, 1471, 1510, 1449, 1513
Vizio
1829, 1433, 1181, 1184, 1042, 1824, 1289, 1625,
1822, 1823, 1831, 1649, 1828, 1705, 1832, 1833
Westinghouse
1515, 1135, 1184, 1544, 1555, 1178, 1567, 1616,
1816, 1198, 1199
Zenith
1037, 1255, 1094, 1020, 1023, 1333, 1061, 1522,
1051, 1015, 1118, 1054, 1001, 1090, 1121, 1382, 1207, 1716, 1301, 1717
